Flat Bar Roof Anchor 500mm

The Flat Bar Roof Anchor 500mm is a temporary single-point anchorage solution designed for fast, compliant tie-off when working on sheet metal roofing. Engineered to suit common Australian roof profiles, it fits to the edge of roof sheeting and is secured using existing roof screws and holes—helping crews minimise installation time while maintaining consistent, repeatable anchorage placement.

Certified to AS/NZS 5532:2013, this anchor is rated for single person use (15kN) and is intended for single-use applications where a reliable attachment point is required for roof access tasks. It is suitable only for sheet metal roofing with a minimum thickness of 0.42mm in the following profiles: Custom Orb and Trimdek, provided the roof sheets are secured with roof screws in accordance with the sheet manufacturer’s instructions. This specification helps reduce the risk of incorrect installation and supports compliance on commercial and industrial sites.

For best practice fall protection, the anchorage must be used in conjunction with an energy absorbing device as part of a complete fall arrest system. As with all height safety equipment, ensure the supporting structure has sufficient strength to sustain applied loads and always consult the user instruction manual prior to use. Ideal for roofers, plumbers, HVAC/service technicians, installers and painters who need a practical, cost-effective anchorage point for maintenance and installation work.