Mechanics Gloves

Mechanics gloves

Mechanics gloves are purpose-built for tool-use: synthetic construction for dexterity, reinforced palms for wrench and fastener work, and (increasingly) TPR impact protection across the back of the hand and fingers. They sit between light-duty synthetics and heavier work leather — designed for people who need to feel a bolt head, not just grip it.

Construction details that matter

• Synthetic leather palm — lighter than cowhide with consistent thickness and better abrasion in high-wear zones.
• Reinforced thumb crotch — the first area to wear on gloves used for hammer and spanner work.
• Spandex or neoprene back — breathable, stretches for finger flex, dries quickly.
• Wrist closure — velcro or elastic; velcro gives a tighter cuff seal against debris.

TPR impact protection

Thermoplastic rubber overlays across the back of the hand, fingers, and knuckles protect against the most common mechanics injuries — bench slips, pinch points, and fastener rebound. ANSI/ISEA 138-rated impact gloves are tested for back-of-hand force dissipation; look for Level 1 (light), Level 2 (medium), or Level 3 (heavy) ratings depending on your task risk.

Fit & sizing

Mechanics gloves fit tighter than general-duty leather — dexterity depends on a close fit. If fingers bunch at the tips, size down. Most ranges offer XS–XXL; measure across the palm at the widest point to convert to size chart.

When to choose something else

Mechanics gloves aren't cut-rated — for sheet metal, glass, or blade work, use a dedicated cut-resistant glove. For welding or hot-exhaust work, use welding gloves. For oily or wet work, a nitrile-coated synthetic gives better grip.

Standards & compliance

Products in this range meet AS/NZS 2161.2 (mechanical) where relevant, with EN 388 markings typically in the 2–3 range for cut and abrasion. Impact-protective models carry ANSI/ISEA 138 certification for back-of-hand impact force dissipation.

Frequently asked questions

Are mechanics gloves oil-resistant?

Most synthetic palm materials handle incidental oil contact well; for sustained immersion or engine work, choose a nitrile-coated range. Oil saturation will stiffen leather or synthetic leather over time.

Can mechanics gloves be machine-washed?

Many modern mechanics gloves are machine-washable on cold with mild detergent. Air-dry; tumble drying degrades TPR overlays and elastic components. Check the product page for confirmation.

How long do mechanics gloves last?

Typical service life for daily workshop use is 2–4 months. Palm wear-through in the thumb crotch or fingertips is the usual failure mode; retire at that point rather than accepting reduced grip on tools.

Do you offer trade or bulk pricing?

Yes — trade accounts get 5% off RRP, and carton-quantity discounts apply on most mechanics ranges. Apply for a trade account →